关于Smarandache ceil函数的一个方程

研究了关于Sm arandache ceil函数的一个方程,并用初等方法得到了它的所有解.     

n次积分C半群与抽象柯西问题的强解

给出了n次积分C半群的几个性质及其证明,讨论了它与一类抽象柯西问题存在强解的关系及强解的表示式.     

基于比率的三种群混合扩散模型的动力学行为

讨论了一类基于比率的非自治三种群混合扩散模型,三种群间既有捕食关系又有竞争关系.我们研究了该模型的动力学行为:包括一致持久性,全局渐近稳定性,周期解,概周期解的存在唯一性.表明即使食饵种群在某些孤立的斑块中可能绝灭,也可以通过适当选取扩散率来保证系统持续生存.     

六偏磷酸钠对AZ31镁合金电化学行为的影响

为提高AZ31镁合金阳极的活化性能以及抑制它的腐蚀,用电化学等方法研究了在中性3.5%Na Cl体系中,六偏磷酸钠(Na6(PO3)6)对AZ31镁合金电化学行为的影响。结果表明:Na6(PO3)6能大幅度抑制AZ31镁合金的腐蚀,但极化程度有所增大。当Na6(PO3)6的质量分数为2.0%时,AZ31镁合金的缓蚀率高达74.9%,腐蚀后其表面均匀,且活化性能有所改善,在-1.10V处时合金的电流密度高达0.033 m A.cm-2,开路电位Eocp负移程度最大(-1.59 V),活化电位Eact负移程度最大(-1.38 V)。试验结果为AZ31镁合金作为电极材料提供了参考。     

复合卤氧化铋纳米材料的合成及其光催化性能

采用低温沉淀法合成了一系列Bi OMxN1-x(M,N=Cl、Br、I)(0X1)复合材料,通过XRD、FESEM、TEM、EDS、UV-vis和PL等一系列表征和对有机物罗丹明光催化降解性能的研究表明:通过对复合材料合成过程中卤素离子含量的控制,使得此类固溶体具有独特的微观形貌和可控能带隙,使其在可见光下具有独特的光催化性能。在相同的光照条件下,Bi OCl0.5Br0.5、Bi OCl0.75I0.25和Bi OBr0.75I0.25相对于其他同系列的Bi OMxN1-x(M,N=Cl、Br、I)(0X1)微球样品而言,具有最好的光催化性能。     

自然光照下PEG/PAA凝胶在Fe~(3+)/CA溶液中的凝胶-溶胶转化行为

将PEG/PAA凝胶浸入铁/柠檬酸(Fe3+/CA)溶液中,自然光照一定时间可实现凝胶-溶胶的相互转化,而且转化行为受溶液的组成及其p H影响。只有当溶液中[Fe3+]0∶[CA]0≤1∶2,且溶液的p H在1~6之间,该转化才会发生,通过改变溶液中[Fe3+]0∶[CA]0的值或溶液的p H可以有效地控制其转化速率。此外,结果还表明,当凝胶转化为溶胶后,向其中加入高价金属阳离子,例如Fe3+、Al3+、Ce4+、Cu2+等,溶胶又会再次转化为凝胶。由于这种新颖的特性,该凝胶有望应用于药物释放、细胞培养等领域。     

NaBF4催化合成二吲哚甲烷类化合物

在乙醇水溶液中,以Na BF4为催化剂,通过吲哚与芳香醛间的串联反应合成了二吲哚甲烷衍生物。考察了催化剂种类、反应介质、温度、反应时间等因素对反应的影响,在优化条件下以较高产率得到了一系列目标产物。     

Role of refractive index in sum frequency generation intensity of salt solution interfaces

Sum frequency generation spectroscopy (SFG) has been widely used to study the interfacial chemistry of aqueous salt solutions of biological or environmental importance. Most of the SFG data analysis used the same bulk refractive index for different salt concentrations despite of the variations of the refractive indices. Here we systematically investigate the influence of the refractive index on the SFG intensities at various experimental conditions. It is discovered that the SFG intensities are the most sensitive to the refractive index at solid/liquid interfaces nearby the total internal reflection geometries. At air/liquid interfaces, the effect of the refractive indices is also nonegligible. Consequently some important SFG results, such as the response of water structures to the ionic strength at the SiO₂/aqueous interfaces, are necessary to be reevaluated. These conclusions on the effect of the small variations of the refractive index are generally useful for the common practice of SFG data analysis.     

Zn/Al层状双氢氧化物-聚氯乙烯纳米复合物的制备与性能

用共沉淀法制备油酸钾改性的Zn2+、Al 3+层状双氢氧化物(Zn/Al-LDH),以环己酮为溶剂,用溶液插层法制备了Zn/Al层状双氢氧化物-聚氯乙烯(PVC)纳米复合物。采用傅里叶红外(FT-IR)、X-射线衍射(XRD)、透射电镜(TEM)对复合材料的结构及形貌进行了表征,并用热分析仪、万能试验机和紫外分光光度计研究了复合物的热稳定性能、拉伸性能和紫外吸收性能。结果表明:Zn/Al-LDH纳米片层无序分散在PVC基体中;Zn/Al-LDH对PVC低温时的骨干脱氯化氢有促进作用;与PVC膜相比,复合膜的分解温度降低,高温碳化温度升高,复合膜的拉伸强度及断裂伸长率得到提高,在300~380nm具有一定的紫外吸收性能。     

A Three‐Minute Synthesis and Purification of Ibuprofen: Pushing the Limits of Continuous‐Flow Processing

In a total residence time of three minutes, ibuprofen was assembled from its elementary building blocks with an average yield of above 90 % for each step. A scale‐up of this five‐stage process (3 bond‐forming steps, one work‐up, and one in‐line liquid–liquid separation) provided ibuprofen at a rate of 8.09 g h^?1 (equivalent to 70.8 kg y^?1) using a system with an overall footprint of half the size of a standard laboratory fume hood. Aside from the high throughput, several other aspects of this synthesis expand the capabilities of continuous‐flow processing, including a Friedel–Crafts acylation run under neat conditions and promoted by AlCl₃, an exothermic in‐line quench of high concentrations of precipitation‐prone AlCl₃, liquid–liquid separations run at or above 200 psi to provide solvent‐free product, and the use of highly aggressive oxidants, such as iodine monochloride. The use of simple, inexpensive, and readily available reagents thus affords a practical synthesis of this important generic pharmaceutical.